For Best Available Prices

Call Toll Free 1-877-816-7304



Barrier Gate Operator w/ Traffic Spikes

The model 1603 barrier gate and traffic spike system is designed as a modular system allowing for flexibility in different applications and easy installation. The 1603 operator is designed with many advanced features and mechanically links the spikes to the barrier arm. The surface mount spikes are easy to install and do not require any trenching or excavating. The 1603 traffic spike system is ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred.

A complete 1603 barrier gate and traffic system consist of several different components. A typical system will require a 1603 operator, transfer box (transfer box is factory installed to the 1603 operator), tunnel section(s) as needed, spike section(s) as needed, end cap, barrier arm, and arm hardware kit. A traffic signal and/or warning sign is required with this system.

  • 1603 does not include barrier arm, arm hardware kit, traffic spikes, or traffic signal
  • Automatic P.A.M.S. (Perimeter Access Management Solution) sequencing with slide and swing gates
  • 1615-081, warning sign and/or 1603-210, traffic signal must be used with this operator
  • Surface mount spikes install easily without trenching and double as a speed bump
  • Transfer box provides direct mechanical linkage between the barrier operator and spikes
  • Barrier arms available in aluminum or wood with optional foam padding
  • Aluminum arm available in LED lighted option

  • $3,733.20
  • $4,148.00
Similar Models
1603-181 - Barrier Gate w/ Convenience Open (C.O.)

1603 Barrier Gate w/ Traffic Spikes

  • 1/2 hp continuous-duty motor
  • 115VAC (230 and 460 volt units use a step-down power transformer to achieve 115V operating voltage)
  • 40:1 gear-box running in a continuous oil bath
  • Arm rotates 90° in approximately 1.5 sec
  • Class II, III, and IV applications
  • Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)
  • G90 galvanized steel housing painted white
  • Rated for 10°F to 115°F (-12°C to 46°C)
  • Dimensions: 15.25"W x 43.5"H x 15.5"D
  • 5-year limited warranty

Spike Components

  • Surface mount tunnel section: 20"W x 2"H x 18"L
  • Tunnel section provides an extension from the operator to the spike section
  • Tunnel sections can be mixed to create the desired length and are used when the 1603 is set back from the curb
  • Surface mount spike section: 20"W x 2"H x 18"L
  • Combination of spike and tunnel sections should not exceed 12' in width
  • Surface mount end cap: 31"W x 3"H x 12.25"L
  • Provides a smooth end to the spike section


  • Entrapment protection devices
  • DC powered convenience open
  • LED lighted arm (aluminum arm only)
  • Foam padding (aluminum arm only)
  • Plug-in loop detectors
  • Heater kit
  • Fan kit
  • Surge suppressors
  • Manual crank kit
  • Lock box
  • Power inverters & backup systems
  • Traffic signal
  • Magnetic limit control
  • Ports for plug-in loop detectors
  • Automatic sequencing inputs for use with slide and swing gate operators
  • Up input memory buffer
  • Down memory option
  • Multiple up commands
  • Two convenience outlets
  • 360° gear box rotation
  • Gate tracker reporting output
  • Programming switches
  • Built-in power On/Off switch
  • Left or right hand mount
  • Wood or aluminum barrier arm (sold separately)
  • Barrier arm hardware kit (sold separately)
  • Manual interlock crank kit available (sold separately)
  • Fail-secure mechanical release method, and hand crank allows lowering of the spikes in the event of a power outage
  • Auto close-timer
  • Two (2) convenience outlets

Parking Control

  • Brochure - Parking Control
  • Manual - PAMS - Perimeter Access Management Solution
  • Manual - Loops & Loop Detectors
  • Info - MUTCD, the Manual for Uniform Traffic Control Devices

1603 Barrier Gate w/ Traffic Spikes


Heater & Fan

Accessories (Cont.)

Barrier Arms
  • Install - Lighted Aluminum Arm
  • IPB - Aluminum Arm, Straight, 14'
  • IPB - Aluminum Arm Hardware Kit
  • IPB - Wood Arm, 14'
  • IPB - Wood Arm Hardware Kit
  • Manual - Single Channel Detector
  • Manual - Single Channel Detector, w AUX Relay
  • Manual - Dual Channel Detector
  • IPB - Drive Extension
  • IPB - Tunnel Extension
  • IPB - Tunnel, 3'
  • IPB - Surface Mount, 3'
  • IPB - Surface Mount, 6'
  • Manual - Manual Interlock Crank
  • Install - Traffic Signal
  • Install - Warning Sign
  • Install - High Voltage Kit

* We do our best to keep all of our technical and sales information up-to-date, but we can't gurantee that all doucuments are current. If there is something you can't find, or if you find a problem, give us a call at 1-877-814-7304.

Products you may like